Hanbell Screw Air Compressor AA6-22A
Hanbell AA6-22A ( Direct Driven)
HANBELL AA6-22A is our best seller, mostly because its reliability and value of money. A direct driven, energy saving, high efficiency, customer satisfaction, stainless pipeline, low gravity design. All design reflects the HANBELL persuing values.
| Model： | AA6-22A | Technical parameters | ||||||
| Item | Unit | Parameter | Mark | |||||
| Performance | Capicity | m3/min | 3.7 | 3 | 2.9 | |||
| Discharge pressure | MPa | 0.8 | 1.0 | 1.3 | ||||
| Vent temperature | ℃ | Ambient temp＋15℃ | ||||||
| Noise | dB(A) | 79±3 | ||||||
| Vibration | mm/s | 1.7 | ||||||
| Outlet gas oil content | ppm | ≤3 | ||||||
| Lubricating oil | L/kg | 14L | ||||||
| Lubricant model | HBA-C05 | |||||||
| Specification | Type of cooling | Air-cooling | ||||||
| Cooling water inlet pressure | MPa | – | ||||||
| Cooling water volume | T/h | – | ||||||
| Driving Method | Direct driving | |||||||
| Operation mode | Continuous operationS1 | |||||||
| Electrical Specification | Motor | Power | kw | 22 | ||||
| Voltage /Frequency /Poles | V/Hz/P | 380/50/2 | 380V±10% | |||||
| Protection/Insulation grade | IP54/F | |||||||
| Speed | Rpm | 2940 | ||||||
| Start-up mode | Direct driving | |||||||
| Motor of fan | Power | kw | 0.45 | |||||
| Voltage /Frequency /Poles | V/Hz/P | 380/50/4 | ||||||
| Protection/Insulation grade | IP54/F | |||||||
| Speed | Rpm | 1320 | ||||||
| Start-up mode | Direct starting | |||||||
| Air flow | m3/h | 5500 | ||||||
| Others | DimensionL*W*H | mm | 1350*830*1200 | |||||
| Net Weight | kg | 620 | ||||||
| Outlet Pipe Diameter | in/DN | 1-1/4″ | ||||||
| Design standards | Parameter specification | |||||||
| Operation condition | Ambient temp | 2℃～45℃ | ||||||
| Relative humidity | ≤60% | |||||||
| Dust pollution | No limit | |||||||
| Altitude | Below sea level 1000m | |||||||
